Already in the basic version the Fire Detection Control Panels BC06-1 and BC06-2 are equipped with four detector lines and, owing to its sophisticated factory settings, are immediately ready for operation. This allows for quick and efficient application of the product. The conventional technology allows for the connection of automatic and non-automatic fire detectors as well as a wide range of special detectors with contact output. Alarms from manual call points and from automatic detectors that are connected together to one detector line can be differentiated and thus evaluated differently by the fire detection control panel, by means of an optional coding module.
Thanks to the two auxiliary inputs whose parameters can be freely set as well as the eight open-collector outputs with predefined function, manifold tasks in the field of fire alarm technology can be realised.
The optional evacuation function serves for the actuation of alarming devices independent from activated alarms. Depending on the parameterisation, different country-specific regulations (e.g., NEN 2575) can be fulfilled.
The Fire Detection Control Panels BC06-1 and BC06-2 provide a slot for the installation of the optional Zone Extension Board ZEB2-1. With this expansion module the control panel can be upgraded from four to six detector zones.
A printer for the event log can be connected via the optional Serial Interface Module SIM06-1. The Fire Detection Control Panel BC06-2 differs from the BC06-1 by the additionally integrated 4-digit electronic alarm counter.
- Mains voltage: 230VAC +10/-20%, 47…63Hz
- Output voltage: typ. 27.6VDC
- Output current of power supply: max. 2.3A
- Line termination: 5.6kΩ or 47µF
- Line resistance: max. 50Ω per core
- Ambient temperature: -5°C to +50°C
- Relative humidity: max. 95% (no condensation)
- Dimensions W × H × D: 330 × 330 × 90 (mm)
- Colour: grey-white, RAL 9002
- Weight without batteries: approx. 3kg